Index

auto-plow / d399c5d

A wheelchair motor-propelled battery-powered ESP32-driven remote control snow plow.

Download | Refs | Commit Log | Files | README | LICENSE

Latest Commit

{#}TimeHashSubjectAuthor#(+)(-)GPG?
630 Nov 2018 18:364a63c8cInclude Arduino core filesJoshua11610N

Blob @ auto-plow / include / arduino / HardwareSerial.h

text/plain5262 bytesdownload raw
1/*
2 HardwareSerial.h - Hardware serial library for Wiring
3 Copyright (c) 2006 Nicholas Zambetti. All right reserved.
4
5 This library is free software; you can redistribute it and/or
6 modify it under the terms of the GNU Lesser General Public
7 License as published by the Free Software Foundation; either
8 version 2.1 of the License, or (at your option) any later version.
9
10 This library is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 Lesser General Public License for more details.
14
15 You should have received a copy of the GNU Lesser General Public
16 License along with this library; if not, write to the Free Software
17 Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
18
19 Modified 28 September 2010 by Mark Sproul
20 Modified 14 August 2012 by Alarus
21 Modified 3 December 2013 by Matthijs Kooijman
22*/
23
24#ifndef HardwareSerial_h
25#define HardwareSerial_h
26
27#include <inttypes.h>
28
29#include "Stream.h"
30
31// Define constants and variables for buffering incoming serial data. We're
32// using a ring buffer (I think), in which head is the index of the location
33// to which to write the next incoming character and tail is the index of the
34// location from which to read.
35// NOTE: a "power of 2" buffer size is reccomended to dramatically
36// optimize all the modulo operations for ring buffers.
37// WARNING: When buffer sizes are increased to > 256, the buffer index
38// variables are automatically increased in size, but the extra
39// atomicity guards needed for that are not implemented. This will
40// often work, but occasionally a race condition can occur that makes
41// Serial behave erratically. See https://github.com/arduino/Arduino/issues/2405
42#if !defined(SERIAL_TX_BUFFER_SIZE)
43#if ((RAMEND - RAMSTART) < 1023)
44#define SERIAL_TX_BUFFER_SIZE 16
45#else
46#define SERIAL_TX_BUFFER_SIZE 64
47#endif
48#endif
49#if !defined(SERIAL_RX_BUFFER_SIZE)
50#if ((RAMEND - RAMSTART) < 1023)
51#define SERIAL_RX_BUFFER_SIZE 16
52#else
53#define SERIAL_RX_BUFFER_SIZE 64
54#endif
55#endif
56#if (SERIAL_TX_BUFFER_SIZE>256)
57typedef uint16_t tx_buffer_index_t;
58#else
59typedef uint8_t tx_buffer_index_t;
60#endif
61#if (SERIAL_RX_BUFFER_SIZE>256)
62typedef uint16_t rx_buffer_index_t;
63#else
64typedef uint8_t rx_buffer_index_t;
65#endif
66
67// Define config for Serial.begin(baud, config);
68#define SERIAL_5N1 0x00
69#define SERIAL_6N1 0x02
70#define SERIAL_7N1 0x04
71#define SERIAL_8N1 0x06
72#define SERIAL_5N2 0x08
73#define SERIAL_6N2 0x0A
74#define SERIAL_7N2 0x0C
75#define SERIAL_8N2 0x0E
76#define SERIAL_5E1 0x20
77#define SERIAL_6E1 0x22
78#define SERIAL_7E1 0x24
79#define SERIAL_8E1 0x26
80#define SERIAL_5E2 0x28
81#define SERIAL_6E2 0x2A
82#define SERIAL_7E2 0x2C
83#define SERIAL_8E2 0x2E
84#define SERIAL_5O1 0x30
85#define SERIAL_6O1 0x32
86#define SERIAL_7O1 0x34
87#define SERIAL_8O1 0x36
88#define SERIAL_5O2 0x38
89#define SERIAL_6O2 0x3A
90#define SERIAL_7O2 0x3C
91#define SERIAL_8O2 0x3E
92
93class HardwareSerial : public Stream
94{
95 protected:
96 volatile uint8_t * const _ubrrh;
97 volatile uint8_t * const _ubrrl;
98 volatile uint8_t * const _ucsra;
99 volatile uint8_t * const _ucsrb;
100 volatile uint8_t * const _ucsrc;
101 volatile uint8_t * const _udr;
102 // Has any byte been written to the UART since begin()
103 bool _written;
104
105 volatile rx_buffer_index_t _rx_buffer_head;
106 volatile rx_buffer_index_t _rx_buffer_tail;
107 volatile tx_buffer_index_t _tx_buffer_head;
108 volatile tx_buffer_index_t _tx_buffer_tail;
109
110 // Don't put any members after these buffers, since only the first
111 // 32 bytes of this struct can be accessed quickly using the ldd
112 // instruction.
113 unsigned char _rx_buffer[SERIAL_RX_BUFFER_SIZE];
114 unsigned char _tx_buffer[SERIAL_TX_BUFFER_SIZE];
115
116 public:
117 inline HardwareSerial(
118 volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
119 volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
120 volatile uint8_t *ucsrc, volatile uint8_t *udr);
121 void begin(unsigned long baud) { begin(baud, SERIAL_8N1); }
122 void begin(unsigned long, uint8_t);
123 void end();
124 virtual int available(void);
125 virtual int peek(void);
126 virtual int read(void);
127 virtual int availableForWrite(void);
128 virtual void flush(void);
129 virtual size_t write(uint8_t);
130 inline size_t write(unsigned long n) { return write((uint8_t)n); }
131 inline size_t write(long n) { return write((uint8_t)n); }
132 inline size_t write(unsigned int n) { return write((uint8_t)n); }
133 inline size_t write(int n) { return write((uint8_t)n); }
134 using Print::write; // pull in write(str) and write(buf, size) from Print
135 operator bool() { return true; }
136
137 // Interrupt handlers - Not intended to be called externally
138 inline void _rx_complete_irq(void);
139 void _tx_udr_empty_irq(void);
140};
141
142#if defined(UBRRH) || defined(UBRR0H)
143 extern HardwareSerial Serial;
144 #define HAVE_HWSERIAL0
145#endif
146#if defined(UBRR1H)
147 extern HardwareSerial Serial1;
148 #define HAVE_HWSERIAL1
149#endif
150#if defined(UBRR2H)
151 extern HardwareSerial Serial2;
152 #define HAVE_HWSERIAL2
153#endif
154#if defined(UBRR3H)
155 extern HardwareSerial Serial3;
156 #define HAVE_HWSERIAL3
157#endif
158
159extern void serialEventRun(void) __attribute__((weak));
160
161#endif
162